|
|
|
|
|
|
|
|
|
|
|
|
|
51132 | E-Z Coil™ Threaded Insert for Metal - M14-1.25 x .281 (3/8 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
51034 | E-Z Coil™ Threaded Insert for Metal - M12-1.25 x .406 (1/2 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
51036 | E-Z Coil™ Threaded Insert for Metal - M12-1.25 x .656 (3/4 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
51134 | E-Z Coil™ Threaded Insert for Metal - M14-1.25 x .406 (1/2 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
50932 | E-Z Coil™ Threaded Insert for Metal - M10-1.0 x .312 (3/8 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
51334 | E-Z Coil™ Threaded Insert for Metal - M18-1.5 x .406 (1/2 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
51136 | E-Z Coil™ Threaded Insert for Metal - M14-1.25 x .656 (3/4 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
51335 | E-Z Coil™ Threaded Insert for Metal - M18-1.5 x .531 (5/8 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
50934 | E-Z Coil™ Threaded Insert for Metal - M10-1.0 x .386 (1/2 Reach)
E-Z Coil™ inserts – also known as wire or helical threaded inserts – quickly repair or reinforce tapped holes in soft metals. Made from 18-8 stainless steel wire, E-Z Coil™ inserts provide strong internal threads that are corrosion resistant and withstand temperatures to 800°F.
E-Z Coil™ inserts are made of 18-8 stainless steel wire. The wire is formed into a diamond pattern and then wound into a spring. Before being installed, the insert diameter is larger than the tapped hole. The insert diameter is reduced during installation, allowing the insert to thread into the hole. Once properly installed, the radial pressure of the released insert holds the insert firmly in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
329-1208 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M12-1.25 (1/2" Reach) x 5/8-18
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
329-1406 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M14-1.25 (3/8" Reach) x 3/4-16
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
329-1808 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M18-1.50 (1/2" Reach) x 1-12
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
329-1212 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M12-1.25 (3/4" Reach) x 5/8-18
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
329-1008 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M10-1.0 (1/2" Reach) x 9/16-18
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
750-14 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M14-1.25 (1/2" Reach) x M18-1.5
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
329-1408 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M14-1.25 (1/2" Reach) x 3/4-16
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
329-1412 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M14-1.25 (3/4" Reach) x 3/4-16
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
330-10 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M10-1.50 (1") x 9/16-12
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
330-11 | E-Z LOK™ Threaded Insert for Metal - Automotive - Carbon Steel - M10-1.50 (1" blind) x 9/16-12
E-Z LOK™ (Solid Wall) Automotive threaded inserts are designed for use in spark plug repair. Internal thread sizes from M10 to M18 are available in a variety of lengths. In addition VW Case Savers are offered in through hole and blind designs.
All E-Z LOK™ (Solid Wall) Automotive inserts are installed using standard tools. No special taps or installation tools needed.
|
EK50932 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M10-1.0 x .375
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
EK51034 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M12-1.25 x .500
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EK51036 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M12-1.25 x .750
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
SK50932 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M10-1.0 x 3/8
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
EK51132 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M14-1.25 x .375
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SK51034 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M12-1.25 x 1/2
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
EK51134 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M14-1.25 x .500
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
SK51036 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M12-1.25 x 3/4
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EK51136 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M14-1.25 x .750
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
EK51334 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M18-1.5 x .500
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
EK51335 | E-Z Coil™ Thread Repair Kit for Metal - Economy - M18-1.5 x .625
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SK51132 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M14-1.25 x 3/8
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
SK51134 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M14-1.25 x 1/2
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
SK51136 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M14-1.25 x 3/4
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SK51334 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M18x1.5 x 1/2
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
SK51335 | E-Z Coil™ Thread Repair Kit for Metal - Standard - M18-1.5 x 5/8
Everything needed to repair or reinforce tapped holes in metal in a convenient, easy-to-order kit.
|
|
|
Call Now! (888) 972-7397 / (973) 777-5411 
