Home > Category Filters > Standard > EN 1.4547
Sort By:
1
NORD-LOCK NL3ss-254 NORD-LOCK NL1/2"spss-254 NORD-LOCK NL1/2"ss-254
NORD-LOCK NL3ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M3 / #5) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1155

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3 or #5 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1/2"spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 1/2) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1404.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1/2"ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 1/2) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1171.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL1/4"spss-254 NORD-LOCK NL1/4"ss-254 NORD-LOCK NL10spss-254
NORD-LOCK NL1/4"spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 1/4) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1162.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1/4"ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 1/4) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1161.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL10spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M10) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2589.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL10ss-254 NORD-LOCK NL11ss-254 NORD-LOCK NL12spss-254
NORD-LOCK NL10ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M10) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1167.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL11ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M11 / 7/16) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1403

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M11 or 7/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL12spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M12) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2590.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL12ss-254 NORD-LOCK NL14spss-254 NORD-LOCK NL14ss-254
NORD-LOCK NL12ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M12) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1169.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL14spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M14 / 9/16) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2811

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M14 or 9/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL14ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M14 / 9/16) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1172

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M14 or 9/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL16spss-254 NORD-LOCK NL16ss-254 NORD-LOCK NL18spss-254
NORD-LOCK NL16spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M16 / 5/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2728

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M16 or 5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL16ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M16 / 5/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1173

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M16 or 5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL18spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M18) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2756.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL18ss-254 NORD-LOCK NL1"spss-254 NORD-LOCK NL1"ss-254
NORD-LOCK NL18ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M18) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2754.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1"spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 1 INCH) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2678.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1"ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 1 INCH) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2758.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL20spss-254 NORD-LOCK NL20ss-254 NORD-LOCK NL22spss-254
NORD-LOCK NL20spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M20) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2748.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL20ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M20) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1177.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL22spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M22 / 7/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2767

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M22 or 7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL22ss-254 NORD-LOCK NL24spss-254 NORD-LOCK NL24ss-254
NORD-LOCK NL22ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M22 / 7/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2749

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M22 or 7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL24spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M24) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 3153.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL24ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M24) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2780.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL27spss-254 NORD-LOCK NL27ss-254 NORD-LOCK NL3.5spss-254
NORD-LOCK NL27spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M27) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2768.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL27ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M27) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2747.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3.5spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M3.5 / #6) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1653

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3.5 or #6 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL3.5ss-254 NORD-LOCK NL3/4"spss-254 NORD-LOCK NL3/4"ss-254
NORD-LOCK NL3.5ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M3.5 / #6) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1400

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3.5 or #6 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3/4"spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 3/4) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2753.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3/4"ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 3/4) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1176.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL3/8"spss-254 NORD-LOCK NL3/8"ss-254 NORD-LOCK NL30ss-254
NORD-LOCK NL3/8"spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 3/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2588.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3/8"ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size 3/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1166.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL30ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M30 / 1-1/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2813

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M30 or 1-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL33ss-254 NORD-LOCK NL36ss-254 NORD-LOCK NL39ss-254
NORD-LOCK NL33ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M33 / 1-1/4) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2760

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M33 or 1-1/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL36ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M36 / 1-3/8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2757

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M36 or 1-3/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL39ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M39 / 1-1/2) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2814

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M39 or 1-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL4spss-254 NORD-LOCK NL4ss-254 NORD-LOCK NL5spss-254
NORD-LOCK NL4spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M4 / #8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1157

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M4 or #8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL4ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M4 / #8) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1156

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M4 or #8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL5spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M5 / #10) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1401

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M5 or #10 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL5ss-254 NORD-LOCK NL6spss-254 NORD-LOCK NL6ss-254
NORD-LOCK NL5ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M5 / #10) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1158

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M5 or #10 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL6spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M6) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2586.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL6ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M6) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1159.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL8spss-254 NORD-LOCK NL8ss-254
NORD-LOCK NL8spss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M8 / 5/16) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 2587

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M8 or 5/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL8ss-254 | Wedge Lock Washer 254 SMO® Stainless Steel (for screw size M8 / 5/16) / Surface hardened EN 1.4547 or equivalent / PREN 45 / Article 1164

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M8 or 5/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This Nord Lock washer is ideal for all general stainless-steel applications and performs exceptionally well in saltwater environments. The washer is surface-hardened to ensure it surpasses the hardness of both the bolt and contact surface, guaranteeing reliable performance. It is also compatible with all standard bolt grades, including A2-50, A2-70, A2-80, A4-50, A4-70, and A4-80. Additionally, the 254 SMO® material offers outstanding corrosion resistance, making it suitable for demanding environment.

254 SMO® is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum, and nitrogen, washers made from 254 SMO® are especially suited for:
  • High chloride environments
  • Salt water solutions/atmospheres
  • Environments where stainless steel washers made of 1.4404 are not adequate
Note: Washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
   
 
1