|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL3ss | Wedge Lock Washer 316 Stainless Steel (for screw size M3 / #5) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1069
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3 or #5 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL1/2”spss | Wedge Lock Washer 316 Stainless Steel (for screw size 1/2) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1110.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL1/2”ss | Wedge Lock Washer 316 Stainless Steel (for screw size 1/2) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2149.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL1/4”spss | Wedge Lock Washer 316 Stainless Steel (for screw size 1/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1086.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL1/4”ss | Wedge Lock Washer 316 Stainless Steel (for screw size 1/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1085.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL10spss | Wedge Lock Washer 316 Stainless Steel (for screw size M10) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1099.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL10ss | Wedge Lock Washer 316 Stainless Steel (for screw size M10) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1094.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL11ss | Wedge Lock Washer 316 Stainless Steel (for screw size M11 / 7/16) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1101
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M11 or 7/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL12spss | Wedge Lock Washer 316 Stainless Steel (for screw size M12) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1107.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL12ss | Wedge Lock Washer 316 Stainless Steel (for screw size M12) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1103.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL14spss | Wedge Lock Washer 316 Stainless Steel (for screw size M14 / 9/16) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2736
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M14 or 9/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL14ss | Wedge Lock Washer 316 Stainless Steel (for screw size M14 / 9/16) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1645
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M14 or 9/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL16spss | Wedge Lock Washer 316 Stainless Steel (for screw size M16 / 5/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2712
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M16 or 5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL16ss | Wedge Lock Washer 316 Stainless Steel (for screw size M16 / 5/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1113
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M16 or 5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL18spss | Wedge Lock Washer 316 Stainless Steel (for screw size M18) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2752.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL18ss | Wedge Lock Washer 316 Stainless Steel (for screw size M18) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2731.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL1”spss | Wedge Lock Washer 316 Stainless Steel (for screw size 1 INCH) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2746.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL1”ss | Wedge Lock Washer 316 Stainless Steel (for screw size 1 INCH) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2734.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL20spss | Wedge Lock Washer 316 Stainless Steel (for screw size M20) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2718.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL20ss | Wedge Lock Washer 316 Stainless Steel (for screw size M20) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1123.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL22spss | Wedge Lock Washer 316 Stainless Steel (for screw size M22 / 7/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2750
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M22 or 7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL22ss | Wedge Lock Washer 316 Stainless Steel (for screw size M22 / 7/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2723
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M22 or 7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL24spss | Wedge Lock Washer 316 Stainless Steel (for screw size M24) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 3135.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL24ss | Wedge Lock Washer 316 Stainless Steel (for screw size M24) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2710.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL27spss | Wedge Lock Washer 316 Stainless Steel (for screw size M27) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2744.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL27ss | Wedge Lock Washer 316 Stainless Steel (for screw size M27) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2719.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL3.5spss | Wedge Lock Washer 316 Stainless Steel (for screw size M3.5 / #6) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1071
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3.5 or #6 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL3.5ss | Wedge Lock Washer 316 Stainless Steel (for screw size M3.5 / #6) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1070
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3.5 or #6 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL3/4”spss | Wedge Lock Washer 316 Stainless Steel (for screw size 3/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2740.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL3/4”ss | Wedge Lock Washer 316 Stainless Steel (for screw size 3/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1121.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL3/8”spss | Wedge Lock Washer 316 Stainless Steel (for screw size 3/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2144.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL3/8”ss | Wedge Lock Washer 316 Stainless Steel (for screw size 3/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1091.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL30spss | Wedge Lock Washer 316 Stainless Steel (for screw size M30 / 1-1/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2745
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M30 or 1-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL30ss | Wedge Lock Washer 316 Stainless Steel (for screw size M30 / 1-1/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2722
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M30 or 1-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL33ss | Wedge Lock Washer 316 Stainless Steel (for screw size M33 / 1-1/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2733
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M33 or 1-1/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL36ss | Wedge Lock Washer 316 Stainless Steel (for screw size M36 / 1-3/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2732
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M36 or 1-3/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL39ss | Wedge Lock Washer 316 Stainless Steel (for screw size M39 / 1-1/2) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2807
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M39 or 1-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL42ss | Wedge Lock Washer 316 Stainless Steel (for screw size M42) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2808.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL45ss | Wedge Lock Washer 316 Stainless Steel (for screw size M45 / 1-3/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2902
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M45 or 1-3/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL48ss | Wedge Lock Washer 316 Stainless Steel (for screw size M48 / 1-7/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2903
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M48 or 1-7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL4spss | Wedge Lock Washer 316 Stainless Steel (for screw size M4 / #8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1074
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M4 or #8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL4ss | Wedge Lock Washer 316 Stainless Steel (for screw size M4 / #8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1072
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M4 or #8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL52ss | Wedge Lock Washer 316 Stainless Steel (for screw size M52 / 2) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2904
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M52 or 2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL56ss | Wedge Lock Washer 316 Stainless Steel (for screw size M56 / 2-1/4) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2905
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M56 or 2-1/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL5spss | Wedge Lock Washer 316 Stainless Steel (for screw size M5 / #10) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1079
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M5 or #10 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL5ss | Wedge Lock Washer 316 Stainless Steel (for screw size M5 / #10) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1075
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M5 or #10 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL60ss | Wedge Lock Washer 316 Stainless Steel (for screw size M60 / 2-3/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2906
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M60 or 2-3/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL64ss | Wedge Lock Washer 316 Stainless Steel (for screw size M64 / 2-1/2) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2907
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M64 or 2-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL68ss | Wedge Lock Washer 316 Stainless Steel (for screw size M68 / 2-5/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2908
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M68 or 2-5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL6spss | Wedge Lock Washer 316 Stainless Steel (for screw size M6) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1083.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL6ss | Wedge Lock Washer 316 Stainless Steel (for screw size M6) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1080.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL72ss | Wedge Lock Washer 316 Stainless Steel (for screw size M72) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2909.
The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL76ss | Wedge Lock Washer 316 Stainless Steel (for screw size M76 / 3) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2910
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M76 or 3 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL80ss | Wedge Lock Washer 316 Stainless Steel (for screw size M80 / 3-1/8) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 2911
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M80 or 3-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NORD-LOCK NL8spss | Wedge Lock Washer 316 Stainless Steel (for screw size M8 / 5/16) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1090
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M8 or 5/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
NORD-LOCK NL8ss | Wedge Lock Washer 316 Stainless Steel (for screw size M8 / 5/16) / Surface hardened EN 1.4404 (AISI 316L) or equivalent / PREN 27 / Article 1087
This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M8 or 5/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
Nord-Lock Steel Construction (SC) washers are wedge-locking washers specially designed for use on steel construction applications in accordance with the European standard EN 14399-3 /EN 14399-4 /EN 14399-8. EN 1.4404 is an austenitic chromium-nickel stainless steel containing molybdenum. EN 1.4404 is one of the most commonly used stainless steel grades. This stainless steel also has extra-low carbon content in order to reduce the risk of chromium-carbide precipitation. Nord Lock washers made of EN 1.4404 are suitable for most applications where no chlorides or acids are present.
|
|
|
Call Now! (888) 972-7397 / (973) 777-5411 
