Home > Category Filters > Standard > EN 1.7182
Sort By:
1
NORD-LOCK NL3 NORD-LOCK NL1” NORD-LOCK NL1/2”
NORD-LOCK NL3 | Wedge Lock Washer, For Screw Size M3 / #5, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1206

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3 or #5 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1” | Wedge Lock Washer, For Screw Size 1 INCH, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2711.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1/2” | Wedge Lock Washer, For Screw Size 1/2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2146.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL1/2”sp NORD-LOCK NL1/4” NORD-LOCK NL10
NORD-LOCK NL1/2”sp | Wedge Lock Washer, For Screw Size 1/2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2147.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1/4” | Wedge Lock Washer, For Screw Size 1/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2670.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL10 | Wedge Lock Washer, For Screw Size M10, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1244.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL100 NORD-LOCK NL105 NORD-LOCK NL10sp
NORD-LOCK NL100 | Wedge Lock Washer, For Screw Size M100, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2895.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL105 | Wedge Lock Washer, For Screw Size M105 / 4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2896

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M105 or 4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL10sp | Wedge Lock Washer, For Screw Size M10, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1250.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL11 NORD-LOCK NL110 NORD-LOCK NL115
NORD-LOCK NL11 | Wedge Lock Washer, For Screw Size M11 / 7/16, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2195

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M11 or 7/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL110 | Wedge Lock Washer, For Screw Size M110, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2897.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL115 | Wedge Lock Washer, For Screw Size M115 / 4-1/2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2898

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M115 or 4-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL12 NORD-LOCK NL120 NORD-LOCK NL125
NORD-LOCK NL12 | Wedge Lock Washer, For Screw Size M12, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1262.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL120 | Wedge Lock Washer, For Screw Size M120 / 4-3/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2899

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M120 or 4-3/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL125 | Wedge Lock Washer, For Screw Size M125 / 4-7/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2900

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M125 or 4-7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL12sp NORD-LOCK NL130 NORD-LOCK NL14
NORD-LOCK NL12sp | Wedge Lock Washer, For Screw Size M12, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1268.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL130 | Wedge Lock Washer, For Screw Size M130 / 5-1/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2901

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M130 or 5-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL14 | Wedge Lock Washer, For Screw Size M14 / 9/16, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1644

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M14 or 9/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL14sp NORD-LOCK NL16 NORD-LOCK NL16sp
NORD-LOCK NL14sp | Wedge Lock Washer, For Screw Size M14 / 9/16, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2707

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M14 or 9/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL16 | Wedge Lock Washer, For Screw Size M16 / 5/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1286

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M16 or 5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL16sp | Wedge Lock Washer, For Screw Size M16 / 5/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2705

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M16 or 5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL18 NORD-LOCK NL18sp NORD-LOCK NL1”sp
NORD-LOCK NL18 | Wedge Lock Washer, For Screw Size M18, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2709.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL18sp | Wedge Lock Washer, For Screw Size M18, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2726.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1”sp | Wedge Lock Washer, For Screw Size 1 INCH, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2727.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL20 NORD-LOCK NL20sp NORD-LOCK NL22
NORD-LOCK NL20 | Wedge Lock Washer, For Screw Size M20, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1307.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL20sp | Wedge Lock Washer, For Screw Size M20, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2706.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL22 | Wedge Lock Washer, For Screw Size M22 / 7/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2804

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M22 or 7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL22sp NORD-LOCK NL24 NORD-LOCK NL24sp
NORD-LOCK NL22sp | Wedge Lock Washer, For Screw Size M22 / 7/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2730

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M22 or 7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL24 | Wedge Lock Washer, For Screw Size M24, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2196.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL24sp | Wedge Lock Washer, For Screw Size M24, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1326.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL27 NORD-LOCK NL27sp NORD-LOCK NL3.5
NORD-LOCK NL27 | Wedge Lock Washer, For Screw Size M27, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2714.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL27sp | Wedge Lock Washer, For Screw Size M27, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2729.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3.5 | Wedge Lock Washer, For Screw Size M3.5 / #6, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1207

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3.5 or #6 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL3.5sp NORD-LOCK NL3/4” NORD-LOCK NL3/4”sp
NORD-LOCK NL3.5sp | Wedge Lock Washer, For Screw Size M3.5 / #6, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1208

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M3.5 or #6 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3/4” | Wedge Lock Washer, For Screw Size 3/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2150.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3/4”sp | Wedge Lock Washer, For Screw Size 3/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2720.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL3/8” NORD-LOCK NL3/8”sp NORD-LOCK NL30
NORD-LOCK NL3/8” | Wedge Lock Washer, For Screw Size 3/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1240.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL3/8”sp | Wedge Lock Washer, For Screw Size 3/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2145.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL30 | Wedge Lock Washer, For Screw Size M30 / 1-1/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1341

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M30 or 1-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL30sp NORD-LOCK NL33 NORD-LOCK NL33sp
NORD-LOCK NL30sp | Wedge Lock Washer, For Screw Size M30 / 1-1/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 3068

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M30 or 1-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL33 | Wedge Lock Washer, For Screw Size M33 / 1-1/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2717

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M33 or 1-1/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL33sp | Wedge Lock Washer, For Screw Size M33 / 1-1/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 3083

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M33 or 1-1/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL36 NORD-LOCK NL36sp NORD-LOCK NL39
NORD-LOCK NL36 | Wedge Lock Washer, For Screw Size M36 / 1-3/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2713

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M36 or 1-3/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL36sp | Wedge Lock Washer, For Screw Size M36 / 1-3/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2735

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M36 or 1-3/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

Note: Washers with thickness 6.6 mm have a thickness tolerance +0.0 / -0.5 mm.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL39 | Wedge Lock Washer, For Screw Size M39 / 1-1/2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2806

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M39 or 1-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL4 NORD-LOCK NL42 NORD-LOCK NL45
NORD-LOCK NL4 | Wedge Lock Washer, For Screw Size M4 / #8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1209

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M4 or #8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL42 | Wedge Lock Washer, For Screw Size M42, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2191.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL45 | Wedge Lock Washer, For Screw Size M45 / 1-3/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 3193

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M45 or 1-3/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL48 NORD-LOCK NL4sp NORD-LOCK NL5
NORD-LOCK NL48 | Wedge Lock Washer, For Screw Size M48 / 1-7/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 3195

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M48 or 1-7/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL4sp | Wedge Lock Washer, For Screw Size M4 / #8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1212

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M4 or #8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL5 | Wedge Lock Washer, For Screw Size M5 / #10, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1213

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M5 or #10 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL52 NORD-LOCK NL56 NORD-LOCK NL5sp
NORD-LOCK NL52 | Wedge Lock Washer, For Screw Size M52 / 2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 3196

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M52 or 2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL56 | Wedge Lock Washer, For Screw Size M56 / 2-1/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2885

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M56 or 2-1/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL5sp | Wedge Lock Washer, For Screw Size M5 / #10, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1218

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M5 or #10 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL6 NORD-LOCK NL60 NORD-LOCK NL64
NORD-LOCK NL6 | Wedge Lock Washer, For Screw Size M6, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1219.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL60 | Wedge Lock Washer, For Screw Size M60 / 2-3/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2886

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M60 or 2-3/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL64 | Wedge Lock Washer, For Screw Size M64 / 2-1/2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2887

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M64 or 2-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL68 NORD-LOCK NL6sp NORD-LOCK NL72
NORD-LOCK NL68 | Wedge Lock Washer, For Screw Size M68 / 2-5/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2888

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M68 or 2-5/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL6sp | Wedge Lock Washer, For Screw Size M6, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1226.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL72 | Wedge Lock Washer, For Screw Size M72, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2889.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL76 NORD-LOCK NL8 NORD-LOCK NL80
NORD-LOCK NL76 | Wedge Lock Washer, For Screw Size M76 / 3, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2890

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M76 or 3 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL8 | Wedge Lock Washer, For Screw Size M8 / 5/16, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1231

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M8 or 5/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL80 | Wedge Lock Washer, For Screw Size M80 / 3-1/8, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2891

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M80 or 3-1/8 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL85 NORD-LOCK NL8sp NORD-LOCK NL90
NORD-LOCK NL85 | Wedge Lock Washer, For Screw Size M85, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2892.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL8sp | Wedge Lock Washer, For Screw Size M8 / 5/16, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 1236

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M8 or 5/16 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL90 | Wedge Lock Washer, For Screw Size M90 / 3-1/2, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2893

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M90 or 3-1/2 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
NORD-LOCK NL95 NORD-LOCK NL1/4”sp
NORD-LOCK NL95 | Wedge Lock Washer, For Screw Size M95 / 3-3/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2894

This Nord-Lock washer can be used in both Metric and Inch/Imperial applications for screw/bolt sizes M95 or 3-3/4 respectively. The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials. 		NORD-LOCK NL1/4”sp | Wedge Lock Washer, For Screw Size 1/4, Steel Zinc Flake Coating, Delta Protekt® KL100, Advanced Corrosion Resistance Finish / Through hardened EN 1.7182 or equivalent / Minimum 1000 hours in salt spray test according to ISO 9227 / Article 2148.

The wedge-locking washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

This washer is through hardened to ensure it is harder than the bolt and contact surface. It is also treated with Delta Protekt®, a surface coating that provides excellent corrosion protection. This makes it an ideal solution for all general applications and for use with all common bolt grades, including 4.8, 5.6, 8.8, 10.9 and 12.9.

Note: Nord Lock washers with an enlarged outer diameter (SP) have the same inner diameter as the standard washers, and are designed to be used together with flanged bolts and nuts (ISO 4161,4162) on oversized and slotted holes, or on sensitive surfaces and soft materials.
   
 
1